Changing The Memory Security Password; Switching Memory Security On - Brother MFC-4820C User Manual

Changing the Memory Security Password

1
Menu/Set
Press
2
Press
SET PASSWORD.
3
Menu/Set
Press
The screen prompts you to enter the
old password.
4
Enter the current password.
5
Menu/Set
Press
6
Enter a 4-digit number as a new
password.
7
Menu/Set
Press
The screen prompts you to re-enter
the new password.
8
Enter the new password again and press
9
Stop/Exit
Press

Switching Memory Security ON

1
Menu/Set
Press
2
Press
SET SECURITY.
3
Menu/Set
Press
The screen prompts you to enter the
password.
4
Enter a 4-digit password, followed by
This is the same as the security password of the machine
already stored.
The screen displays ACCEPTED for 2 seconds, followed by
SECURE MODE - Memory Security is now switched ON.
If the password you enter at Step 4 is incorrect, the screen
would display WRONG PASSWORD. After 2 seconds the display
will then return to normal (displaying the date & time). You must
then start from Step 1 to set Memory Security.
6 - 22 SETUP SEND
2 0 1
, , , .
to choose
.
.
.
.
2 0 1
, , , .
to choose
.
MISCELLANEOUS
1.MEM SECURITY
MEM SECURITY
OLD PASSWD:XXXX
MEM SECURITY
NEW PASSWD:XXXX
MEM SECURITY
VERIFY:XXXX
Menu/Set
.
MISCELLANEOUS
1.MEM SECURITY
MEM SECURITY
PASSWORD:XXXX
Menu/Set
.