Ppp Over Ethernet - NetComm N300 User Manual

PPP over Ethernet

This utilises the Ethernet WAN port to provide a PPP over Ethernet (PPPoE) connection to the Internet.
TITLE
PPPoE Account:
PPPoE Password:
(For security, this field appears blank. If you don't want to change the password, leave it empty)
Primary DNS/Secondary DNS:
Connection Control:
Maximum Idle Time:
PPPoE Service Name:
Assigned IP address:
Maximum Transmission Unit (MTU):
NAT disable:
Half Bridging:
YMLO-3G18WV
www.netcomm.com.au
NETCOMM LIBERTY™ SERIES - 3G Wireless N300 VoIP Router
DESCRIPTION
The account name given to you by your ISP.
The password given to you by your ISP.
This feature allows you to manually assign a Primary and Secondary DNS Server (optional -
Refer to your ISP for more information).
There are 3 modes to select from:-
Connect-on-demand: The 3G18WV will connect to the internet when a client sends
outgoing packets.
Auto Reconnect (Always-on): The 3G18WV will automatically reconnect to the internet
until the connection is manually disconnected.
Manually: The 3G18WV will not connect to the internet until someone clicks the connect
button in the Status-page.
The amount of inactivity on the internet connection before it is disconnected. Set it to zero
or enable "Auto-reconnect" to disable this feature.
Enter the service name if your ISP requires it (optional - Refer to your ISP for more
information).
Enter the IP address assigned to your service. This is usually left blank.
The default MTU value is 0 (auto). It is set automatically when you connect.
This option disables "Network Address Translation" for this connection type.
This option enables "Half Bridging" for this connection type. (Half bridging is utilised to
enable a single computer to be 'Live' on the internet. This means any services, such as
internet gaming, which would usually require port forwarding for are able to be connected
to directly.)
3G18WV User Guide
25