NetComm N300 User Manual page 31

WDS (Wireless Bridging)
Wireless Distribution System (WDS) allows you to connect to other wireless access points (Remote APs), and in doing so extend a wired
infrastructure to locations where cabling is not possible or inefficient to implement.
Enter the MAC address of the other wireless access points taking part in the WDS network and then click "Save".
WPS Setup
WiFi Protected Setup (WPS) offers safe and easy way to connect wirelessly.
Simply push the WPS button on the router and then press the WPS on your wireless device within 2 minutes and the WLAN connection should
be completed automatically.
TITLE
AP PIN:
Config Mode:
Config Status:
Config Method:
These settings should not need to be changed.
YMLO-3G18WV
www.netcomm.com.au
NETCOMM LIBERTY™ SERIES - 3G Wireless N300 VoIP Router
DESCRIPTION
The current PIN used to connect. Click "Generate New PIN" to force the router to create a new PIN.
Set the router to be either the Registrar or Enrollee.
You can discard the current WPS configuration by clicking "Release".
Set the WPS configuration method to either Push Button or PIN code.
3G18WV User Guide
31