Network Setup - NetComm N300 User Manual

Network Setup

This Page allows you to change the LAN (Local Area Network) settings on your 3G18WV Wireless router and the WAN
(Wide Area Network) connection.
TITLE
LAN IP Address:
(The computers on your network must use this IP address as their Default Gateway. You can change it if necessary.)
Subnet Mask:
Auto Failover status:
WAN Interface:
WAN Type:
Select a high availability website in order to check if your WAN connection has dropped. For example: www.google.com
Click "Add New" and select the appropriate secondary WAN connection method.
Click "Save" to save your WAN failover settings.
3G18WV User Guide
22
DESCRIPTION
The local IP address of the 3G18WV.
Enter 255.255.255.0 in the subnet field.
Enable and configure the WAN failover feature. By default, your primary connection is 3G.
If you wish to set a failover connection, click on the Setting button to display the below screen.
Please select the appropriate secondary connection method from this page.
Note: This setting is optional and is not required if you only wish to use 3G as your connection
method with no failover.
Combo WAN mode: Select "Failover" from the pull down menu to enable the automatic failover
feature.
Select Ethernet WAN or Wireless WAN.
WAN connection type. Click the WAN Type pull down menu to choose the appropriate connection
type from the following options:
YMLO-3G18WV
www.netcomm.com.au