NetComm N300 User Manual page 44

Reset to Default
You can reset your 3G18WV to the factory default settings by clicking on this link.
After clicking "OK", the router will reset and start up with the default settings loaded.
Reboot
You can reboot your router by clicking on the "Reboot" link. This can be useful to ensure restore settings are loaded.
Miscellaneous
You can configure Wake-on-LAN (WOL) from this page.
Wake-on-LAN enables the router to start-up a computer or device (if the computer supports it) when a WOL packet is detected on the network
going to the client MAC you have entered.
3G18WV User Guide
44
YMLO-3G18WV
www.netcomm.com.au