NetComm N300 User Manual page 26

PPTP
This utilises the Ethernet WAN port to provide a PPTP Virtual Private Network (VPN) connection to a PPTP server.
Please verify your connection type and select the appropriate IP Mode: Static IP Address or Dynamic IP Address.
Static IP Address:
Enter the IP address information provided to you by your service provider.
My IP Address, My Subnet Mask and WAN Gateway IP: The IP address, subnet mask and Gateway IP address supplied to you by your
PPTP provider.
STATIC IP AND DYNAMIC IP ADDRESS CONNECTION TYPES:
Server IP Address/Name:
PPTP Account and Password:
Connection ID:
Maximum Idle Time:
Connection Control:
Maximum Transmission Unit (MTU):
Half Bridging:
3G18WV User Guide
26
The IP address or URL of the PPTP server.
The username and password supplied to you by your PPTP provider. (If you don't want to
change the password, leave it empty)
Enter your connection ID if required.
The amount of inactivity on the internet connection before it is disconnected. Set it to zero
or enable "Auto-reconnect" to disable this feature.
There are 3 modes to select from:-
Connect-on-demand: The 3G18WV will connect to the internet when a client sends
outgoing packets.
Auto Reconnect (Always-on): The 3G18WV will automatically reconnect to the internet
until the connection is manually disconnected.
Manually: The 3G18WV will not connect to the internet until someone clicks the connect
button in the Status-page.
The default MTU value is 0(auto). It is set automatically when you connect.
This option enables "Half Bridging" for this connection type. (Half bridging is utilised to
enable a single computer to be 'Live' on the internet. This means any services, such as
internet gaming, which would usually require port forwarding for are able to be connected
to directly.)
YMLO-3G18WV
www.netcomm.com.au