Service Domain
The Service Domain page is where you enter your VOIP service settings as supplied by your VOIP service provider (VSP). If you are unsure about
a specific setting or have not been supplied information for a particular field, please contact your VOIP service provider to verify if this setting is
needed or not.
TITLE
Display Name:
User Name:
Register Name:
Register Password:
Realm:
Domain:
Proxy Server:
Registrar:
Use Outbound server:
Outbound Proxy:
Subscribe for MWI:
Refresh time for MWI:
MWI Server URI:
Status:
Click "Save" to save your settings and connect to your VOIP service or "Undo" to discard the settings entered.
Port Setting
The Port Setting page enables you to specify a different SIP or RTP Port number to connect to your VOIP service on.
This setting should not need to be changed unless directed to do so.
Click "Save" to save your settings or "Undo" to discard the settings entered.
YMLO-3G18WV
www.netcomm.com.au
NETCOMM LIBERTY™ SERIES - 3G Wireless N300 VoIP Router
DESCRIPTION
Enter the display name for your VOIP service.
Enter the User Name for your VOIP service.
Enter the Register Name (May be called the "Auth ID") for your VOIP service.
Enter the Register Password (May be called the "Auth Password") for your VOIP service.
Enter the Realm in use for your VOIP service.
Enter the Domain for your VOIP service.
Enter the Proxy Server address in use for your VOIP service.
Enter the Registrar for your VOIP service.
Enable or Disable the use of an Outbound Proxy for VOIP calls.
Enter the Outbound Proxy server address to use.
Enable or Disable the use of the "Message Waiting Indicator" function.
Set the time period between MWI checks in seconds.
Enter the address for the MWI server.
The current status of your VOIP service.
TITLE
SIP Port:
RTP Port:
DESCRIPTION
Select the port for SIP traffic to use.
Select the port for RTP traffic to use.
3G18WV User Guide
47