Minimum System Requirements; Led Indicators - NetComm N300 User Manual

Minimum System Requirements

Before continuing with the installation of your 3G18WV router, please confirm that you comply with the minimum system requirements.
- 3G USB modem with SIM card for 3G Broadband access if you want to use a 3G Broadband service.
Note: Subject to terms and conditions from your 3G Broadband Internet Service.
- Computer with Windows, Macintosh, or Linux-based operating systems with a working Ethernet adapter with TCP/IP Protocol installed.
- Internet Explorer version 6.0 and above, Mozilla Firefox version 3.0 and above or Safari 5 and above.
Wireless Computer System Requirements
- Computer with a working 802.11b, 802.11g, 802.11n wireless adapter
VoIP Telephony Requirements
1. Standard analogue PSTN or cordless PSTN phone handset (DECT) with an RJ-11 port. (ISDN phone handsets are not supported)
2. RJ-11 to RJ-11 phone connectivity cable
3. Subscription to a VoIP Service by a VoIP Service Provider using SIP version 1.0 or 2.0 (Session Initiation Protocol)

LED indicators

TITLE
LAN (1-4)
WAN
Power
3G
Phone
WiFi
3G18WV User Guide
6
ICON DESCRIPTION
Device connected to corresponding Ethernet port. The LED flashes when there is activity on the
—
port.
Device connected to the WAN port. The LED flashes when there is activity on the port.
The 3G18WV is powered on.
The 3G18WV is connected via 3G. The LED flashes when there is activity via the 3G connection.
The 3G18WV is signed into a valid VOIP account.
The Wireless network function of the 3G18WV is active. The LED flashes when there is activity on
the Wireless network.
YMLO-3G18WV
www.netcomm.com.au