NetComm N300 User Manual page 30

Wireless
The Wireless LAN settings page allows you to configure the wireless network features of the router.
TITLE
WLAN Network Name (SSID):
SSID Broadcast:
WLAN Channel:
Wireless Mode:
Authentication:
WPA-PSK/WPA2-PSK is a newer type of security. This type of security gives a more secure network compared to WEP. Use TKIP Encryption Type
for WPA-PSK and AES for WPA2-PSK.
Please enter the key in the "Preshare Key". The key needs to be more than 8 characters and less than 63 characters. It can be any combination of
letters and numbers.
Note: The configuration for WPA-PSK and WPA2-PSK is identical
After configuring wireless security, you also need to configure your wireless adapter to use the same security settings before you can connect
wirelessly. Not all wireless adapter supports WPA-PSK/WPA2-PSK/WPA/WPA2 security. Please refer to your wireless adapter user guide for
more information.
It is strongly recommended to set up wireless security such as WPA-PSK (when the wireless client supports WPA) in order to secure your network.
Click "Save" to save these settings or click "Undo" to cancel.
3G18WV User Guide
30
DESCRIPTION
Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam freely
over this product and other Access Points that have the same Network ID. (Please refer to
the included Wireless security card insert for your default SSID)
The router will broadcast the SSID so that wireless clients can find the wireless network.
The wireless radio channel in use by your network.
Choose B/G Mixed, B only, G only, and N only, G/N Mixed or B/G/N mixed.
(The factory default setting is B/G/N mixed)
You may select from the following authentication types to secure your wireless network:-
Open
Shared
Auto
WPA
WPA-PSK
WPA2
WPA2-PSK
WPA/WPA2
WPA-PSK/WPA2-PSK.
YMLO-3G18WV
www.netcomm.com.au