AEG BY9314001 User Manual page 41

• To clean metal surfaces, use a usual cleaning agent.
• Clean the appliance interior after each use. Then you can remove dirt more easily and it
does not burn on.
• Clean stubborn dirt with a special oven cleaner.
• Clean all accessories after each use and let them dry. Use a soft cloth with warm water
and a cleaning agent.
• If you have nonstick accessories, do not clean them using aggressive agents, sharp-edged
objects or a dishwasher. It can cause damage to the nonstick coating.
Pyrolytic cleaning
1. Remove the removable shelf supports (if applicable) and accessories from the appli-
ance.
The pyrolytic cleaning procedure cannot start:
– If you do not remove the shelf support or telescopic runners (if present).
– If you do not remove the core temperature sensor plug from the socket.
– If you do not close the appliance door correctly.
2. Remove the worst dirt manually.
3. Clean the inner side of the door with hot water to avoid any residue burning in be-
cause of hot air.
Activate the appliance and set the Pyrolysis function in the main menu. Press OK to
4.
confirm.
5. Set the duration of the cleaning procedure:
– Quick – 1 h for a low degree of dirt
– Normal – 1 h 30 min for a usual degree of dirt
– Intense – 2 h 30 min for a high degree of dirt.
6. Touch OK to confirm.
When the pyrolytic cleaning starts, the appliance door is locked. After the function is com-
pleted, the door stays locked for the cool down phase. Some of the appliance functions are
not available during the cool down phase.
WARNING!
After the function is completed, the appliance is very hot. Let it cool down. There is a risk of
burns.
Care and cleaning
41