Before First Use - AEG BY9314001 User Manual

10

Before first use

BEFORE FIRST USE
WARNING!
Refer to "Safety information" chapter.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
First Connection
When you connect the appliance to the mains or after a power cut, you have to set the
language, display contrast, display brightness and time of day. Use the shuttle to set the
values. Press OK to confirm.
Calibration
For best results with Auto Cooking , you must calibrate the appliance. The calibration time is
4 hours.
If you use manual cooking only, you can ignore this procedure.
Conditions:
• The temperature in the kitchen must be below 35°C.
• Install the appliance in its permanent location.
• Connect the appliance to the mains supply and do not disconnect it again.
• If you change the appliance location or electrical connection, you must do the steps
again.
Calibration:
1. Activate the appliance.
2. Select Basic Settings and press OK.
3. Select Calibration and press OK.
When you calibrate for the first time, you can set the category from the control panel or
Auto Cooking from the main menu to start the procedure.
CAUTION!
Make sure that the appliance is cool before you use it.