Clock Functions - AEG BY9314001 User Manual

16

Clock functions

CLOCK FUNCTIONS
Symbol
If you set the time for a clock function, the time starts to count down after 5 seconds.
If you use the clock functions Duration and End Time , the appliance deactivates the heat-
ing elements after 90 % of the set time. The appliance uses the residual heat to continue
the cooking procedure until the time ends. The residual heat can stay in the appliance from
3 to 20 minutes.
Setting the clock functions
1. Set a heating function.
2. Press
related symbol.
Use the shuttle to set the necessary time. Press OK to confirm. When the time ends, an
3.
acoustic signal sounds. The appliance deactivates. The display shows a message.
4. Press a sensor field to stop the signal.
Useful information:
• With Duration and End Time , you must set the heating function and the temperature
first. Then you can set the clock function. The appliance deactivates automatically.
• You can use Duration and End Time at the same time if you want to automatically acti-
vate and deactivate the appliance at a given time later.
• When you use the Core Temperature Sensor (if applicable), the Duration and End Time
functions do not operate.
Heat + Hold
The Heat + Hold function keeps prepared food warm at 80 °C for 30 minutes. It activates
after the baking or roasting procedure ends.
• You can activate or deactivate the function in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80 °C.
– The function Duration is set.
Activating the function
1. Activate the appliance.
Function
To set a countdown (max. 2 h 30 min). This function has no ef-
fect on the operation of the appliance. You can also activate it
Minute Minder
when the appliance is deactivated. Press
function. Use the shuttle to set the minutes and OK to start.
To set the length of an operation (max. 23 h 59 min).
Duration
To set the switch-off time for a heating function (max. 23 h 59
End Time
min).
again and again until the display shows the necessary clock function and the
Description
to activate the