If the appliance has the Pyrolytic cleaning function and the function operates, the door
locks automatically.
A message comes on in the display when you touch a sensor field.
SET + GO
The SET + GO function lets you set a heating function (or programme) and use it later with
one press of the sensor field.
Activating the function:
1.
Activate the appliance.
2.
Set a heating function.
3.
Press
4.
Set the time.
5.
Press
Press OK to confirm.
6.
To start SET + GO , press a sensor field (except for
When the heating function ends, an acoustic signal sounds.
Useful information:
• When the heating function operates, the function Function Lock is on.
• You can activate and deactivate the SET + GO function in the Basic Settings menu.
Automatic switch-off
For safety reasons the appliance deactivates after some time:
• If a heating function operates.
• If you do not change the oven temperature.
The automatic switch-off works with all functions, except Light , Duration , End Time and
Core Temperature Sensor.
Cooling fan
When the appliance operates, the cooling fan activates automatically to keep the surfaces
of the appliance cool. If you deactivate the appliance, the cooling fan can continue to oper-
ate until the appliance cools down.
again and again until the display shows Duration .
again and again until the display shows SET + GO .
Temperature
30 °C - 120 °C
120 °C - 200 °C
200 °C - 250 °C
250 °C - maximum °C
Additional functions
). The set heating function starts.
Switch-off time
12.5 h
8.5 h
5.5 h
3.0 h
23