Table of Contents
Advertisement
24 electrolux
Problem
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up.
The Time of day
indicator ap-
pears in the display
The oven lamp does not operate The oven lamp is defective
The display shows F11
The display shows an error
code that is not in this list
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
ENVIRONMENT CONCERNS
The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
Possible cause
The appliance is switched off
The clock is not set
The necessary settings are not
set
The automatic cut-out is switch-
ed on
The fuse is released
Demo mode is on
• There is a short circuit of the
meat probe
• The meat probe plug is not
correctly installed into the
meat probe socket
There is an electronic fault
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Solution
Switch on the appliance
Set the clock. Refer to "Setting
the clock"
Make sure, the settings are cor-
rect
Refer to "Automatic cut-out"
Make sure, if the fuse is the
cause for the malfunction. If the
fuse releases again and again,
refer to an authorized electrician
Press the Selection
ton for 2 seconds, then press
the Selection
tons together and hold for 2 sec-
onds
Replace the oven lamp
Insert the meat probe plug as
far as possible
• Switch off the appliance with
the house fuse or the safety
switch in the fuse box and
switch it on again
• If the display shows the error
code again, refer to the Cus-
tomer Care Department
.........................................
.........................................
.........................................
but-
and
but-
Advertisement
Table of Contents
