Table of Contents
Advertisement
22 electrolux
4. Set an oven function.
5. Set the oven temperature to 250 °C and
let the oven operate for 1 hour.
6. Clean the oven cavity with a soft and
damp sponge.
Caution! Do not attempt to clean
catalytic surfaces with oven sprays,
abrasive cleaners, soap or other
cleaning agents. This may damage the
catalytic surface.
Discolouration of the catalytic surface
has no effect on catalytic properties.
Telescopic shelf runners
You can remove the telescopic runners to
clean the side walls.
Removing the telescopic runners
1.
Pull the front of the telescopic runners
away from the side wall.
2.
Pull the telescopic runners from the rear
side of the wall and remove the telescop-
ic runners.
Installing the telescopic runners
Install the telescopic runners in the opposite
sequence.
Important! The retaining pins on the
telescopic shelf runners must point to the
front!
Caution! Do not clean the telescopic
runners in the dishwasher. Do not
lubricate the telescopic runners.
Oven lamp
Warning! There is a danger of
electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or
switch off the circuit breaker.
Put a cloth on the bottom of the oven
for protection of the oven light and
glass cover.
Replacing the oven light bulb/cleaning the
glass cover
1. Turn the glass cover anti-clockwise to re-
move it.
2. Clean the glass cover.
3. Replace the oven light bulb with applica-
ble 300°C heat-resistant oven light bulb.
4. Install the glass cover.
Replacing the oven lamp (left side of the
appliance) Cleaning the glass cover
1. Remove the left shelf support rail.
2. Use a cross-tip screwdriver to remove
the glass cover.
3. Use a narrow, blunt object (e.g. a tea-
spoon) to take off the glass cover and
clean it.
4. If necessary: Replace the oven lamp.
Technical data: 300°C, heat resistant.
Advertisement
Table of Contents
