Powering Off; Powering Off The Rimage Dln5200; Power Off The Rimage Dl5200; Loading Discs - Rimage DL5200 User Manual

Rimage DL5200/DLN5200 User Guide

Powering off

Powering off the Rimage DLN5200

1. Close all open applications.
2. Briefly press the PC power button to shut down the
software, Windows, and the embedded PC.
Caution: Do not press and hold the PC power
button. If you press and hold the PC power button,
the embedded PC will not shut down properly. This
may cause data loss or corruption.
Note: Powering off the DLN5200 takes
approximately 30 seconds.
3. When the PC has powered off, press the main power
switch to power off the DLN5200.

Power off the Rimage DL5200

1. Close all applications.
2. Press the main power switch to power off the Rimage DL5200.
Note: When you start the Rimage DL5200 again, you must first power on the DL5200
and then power on the attached computer so the recorders are recognized.

Loading discs

The input bin holds up to 50 discs. Use the
recommended Rimage media with the Everest
printer.
1. Open the supply door.
2. Remove the input bin.
8
PC Power Button
Supply
Door
110768_E