3. Place the discs in the input bin with the
recording side facing down.
Important! Hold the discs by the
edge. Fingerprints affect print quality.
4. Place the input bin on the base plate.
5. Rotate the input bin until it drops into the
notches.
6. Close the supply door.
Removing or installing the front panel
Removing the front panel
Grasp the sides of the front panel and pull out.
Note: The front panel has four pins that
are held in with retaining clips.
Installing the front panel
Align the pins to the retaining clips and press
into place.
110768_E
Operate the Rimage DLN5200/DL5200
Input Bin
Notch
Front Panel
Base Plate
9
Need help?
Do you have a question about the DL5200 and is the answer not in the manual?
Questions and answers