Operate The Rimage Dln5200/Dl5200; Powering On; Powering On The Rimage Dln5200; Powering On The Rimage Dl5200 - Rimage DL5200 User Manual

Operate the Rimage DLN5200/DL5200

Powering on

Before you begin:
Set up the Everest printer. For more information, refer to the Rimage Everest Printer™ setup
guide.

Powering on the Rimage DLN5200

1. Ensure the PC power switch is in the on
position.
2. Press the main power switch on the rear
of the autoloader to power on the
autoloader.
Note: After powering on the
autoloader, the printer initializes.
3. Press the PC power button on the front of
the autoloader to power on the embedded
PC. When the DLN5200 autoloader has
completed the initialization, the operator
panel displays RIMAGE DLN5200 READY.

Powering on the Rimage DL5200

Before powering on the computer attached to the
DL5200, power on the DL5200 by pressing the main
power switch.
When the DL5200 autoloader has completed the
initialization, the operator panel displays RIMAGE
DL5200 READY.
110768_E
Operate the Rimage DLN5200/DL5200
PC Power
Switch
Power Switch
Power Switch
PC Power
Button
7