Safety Testing - Rimage DL5200 User Manual

Safety testing

Product name: Rimage DLN5200/DL5200
Model:
•
DLN5200: RAS15E
•
DL5200: RAS15
Notice for USA
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This product complies with UL 60950-1.
Notice for Canada
This Class B digital apparatus complies with Canadian ICES-003 Issue 3:1997.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du
C
Canada.
This product complies with CAN/CSA-C22.2 No. 60950-1-03
Notice for Europe
This product is in conformity with the EMC Directive (89/336/EEC) and the Low-
Voltage Directive (73/23/EEC) through compliance with the following European
standards: EN 55022: 1998 + Amd 1: 2000 Amd 2:2003 Class B Limit;
EN 55024: 1998; EN 61000-3-2:1995; EN 61000-3-3:1995 + Amd 1: 2001;
IEC 60950-1 (2001). The CE mark has been affixed in accordance with the CE
Marking Directive 93/68/EEC.
110768_E
Learn More
19