Description Of Parts; Operator Panel; Operator Button; Beeper - Rimage DL5200 User Manual

Identify the parts of the Rimage DLN5200/DL5200

Description of Parts

Operator panel

Operator Panel
The operator panel has a two-line display that
informs you of operations or any conditions
that require operator intervention.
The Rimage DLN5200 displays the name of
the embedded PC or product name after it
initializes. The computer name is displayed by
default. This is helpful in identifying the
embedded PC on the network. Refer to the
Operate Gemini Utilities section on page 15 to
see other options.
Operator Panel

Operator Button

Operator button
The operator button is a push button used to
open and close the print drawer. The operator
button is only accessed by removing the front
panel.
Press the operator button to open the print
drawer. Press it again to close the print
drawer.

Beeper

The Rimage DLN5200/DL5200 has a beeper that sounds when user intervention is required.
Read the condition on the operator panel or at the client application and take appropriate action
to correct the problem. To stop the beeping, open the supply door.
To change the number of beeps or to disable the beeper, refer to the Enabling the beeper section
on page 15.
110768_E 5