Operate The Rimage Dln5200/Dl5200; Powering On - Rimage DLN5200 User Manual

Operate the Rimage DLN5200/DL5200

Powering on

Before you begin:
Set up the Everest printer. For more information, refer to the Everest Printer Unpacking and
Setup Guide.
Powering on the Rimage DLN5200
1. Press the PC power switch to the 'on'
position.
2. Press the main power switch to the 'on'
position.
Note: After pressing the main power
switch to the 'on' position, the Everest
printer initializes.
3. Press the PC power button to power on
the embedded PC. When the DLN5200
autoloader has completed the initialization,
the operator panel displays RIMAGE
DLN5200 READY.
Powering on the Rimage DL5200
Before powering on the computer attached to the
DL5200, press the main power switch to the 'on'
position.
When the DL5200 autoloader has completed the
initialization, the operator panel displays RIMAGE
DL5200 READY.
110768_D
Operate the Rimage DLN5200/DL5200
PC Power
Switch
Main Power
Switch
Main Power
Switch
PC Power
Button
9