Figure 13: Channels Page Definitions - Grandstream Networks GXW-410x User Manual

Figure 13: Channels Page Definitions

SIP User ID
Authentication ID SIP service subscriber's Authenticate ID used for authentication. Can be
Authentication
Password
Profile ID
Call Progress
Tones
Channel Voice
Settings
Tx to PSTN
Audio Gain (dB)
Rx from PSTN
Audio Gain (dB)
Silence
Suppression
Echo
Cancellation
Channel specific
Setting
Grandstream Networks, Inc.
User account information, provided by VoIP service provider (ITSP), usually
has the form of digit similar to phone number or actually a phone number.
identical to or different from SIP User ID.
SIP service subscriber's account password for GXW-410x to register to
(SIP)
servers of ITSP.
Select the corresponding Profile ID (1/2/3)
Using these settings, user can configure tone frequencies according to their
preference. By default, the tones are set to North American frequencies.
Frequencies should be configured with known values to avoid
uncomfortable high pitch sounds. ON is the period of ringing (ON time in
ms) while OFF is the period of silence. In order to set a continuous ring,
OFF should be zero. Otherwise it will ring ON ms and a pause of OFF ms
and then repeat the pattern.
"Dial tone"
"Ringback tone"
"Busy/Re order tone"
"Confirmation tone"
Channel voice settings mentioned below.
Allows user to set a value in dB for transmission to PSTN Audio Gain.
Allows user to set a value in dB for receive from PSTN Audio Gain.
This controls the silence suppression/VAD feature of G723 and G729. If set
to "Yes", when a silence is detected, small quantity of VAD packets (instead
of audio packets) will be sent during the period of no talking. If set to "No",
this feature is disabled.
When set to Y, Echo cancellation is enabled.
Channel specific settings mentioned below.
GXW-410x User's Manual
Firmware 1.0.0.32
Page 20 of 34