Summary of Contents for Grandstream Networks GXW-410
Page 1
Grandstream Networks, Inc. Analog IP Gateway GXW-410x 4 or 8 FXO Ports w/Video Surveillance GXW-410x User’s Manual www.grandstream.com Firmware Version 1.0.0.53 support@grandstream.com...
PGRADE THROUGH TFTP......................... 30 PGRADE THROUGH Download local TFTP Server....................... 30 RESTORE FACTORY DEFAULT SETTING....................31 EXAMPLES OF GXW-410X CONFIGURATIONS ..................32 GLOSSARY OF TERMS ..........................34 Grandstream Networks, Inc. GXW-410x User Manual Page 2 of 37 Firmware 1.0.0.53 Updated: 04/2007...
Page 3
GXW-410 .................... 6 IGURE IAGRAM OF ANEL 2: D GXW-410 ..................7 IGURE IAGRAM OF ISPLAY ANEL 3: F IP-PBX & GXW-410 ................8 IGURE UNCTIONAL IAGRAM OF 4: S GXW-410 ................13 IGURE CREEN SHOT OF CREEN 5: S ..................
ELCOME Thank you for purchasing the Grandstream GXW–410x IP Analog FXO Gateway. The GXW–410x is a cost effective, easy to use and easy to configure IP communications solution for any business. The GXW–410x supports popular voice codecs and is designed for full SIP compatibility and interoperability...
Grandstream, contact your Gra ndstream Sales and Service Representative for a RMA (Return Materials Authorization) number. Grandstream reserves the right to remedy warranty policy without prior notification. Grandstream Networks, Inc.
Power adapter connection Off/On switch OFF/ON FXO1 - FXO8 FXO ports to be connected to physical PSTN lines from a traditional PSTN PBX or PSTN Central Office. Grandstream Networks, Inc. GXW-410x User Manual Page 6 of 37 Firmware 1.0.0.53 Updated: 04/2007...
OFF while the new files are written. The entire process may take between 5 to 15 minutes. The firmware upgrade is complete when you can login into the web configuration pages. Grandstream Networks, Inc. GXW-410x User Manual Page 7 of 37 Firmware 1.0.0.53...
PSTN. Most of the configuration on the Gateway for this case will remain default, except Stage Method needs to be set to 1, and SIP Server IP Address/DNS name has to be filled. IP-PBX & GXW-410 UNCTIONAL IAGRAM OF...
Local SIP Listen port (For VOIP to PSTN calls) - 5060++ Profile 1 SIP Server - Set it to IP Address of GXW400x SIP Registration - No NAT traversal - No Grandstream Networks, Inc. GXW-410x User Manual Page 9 of 37 Firmware 1.0.0.53 Updated: 04/2007...
For more information regarding this setup, email Grandstream technical support at support@grandstream.com EATURES GXW–410x is a next generation IP voice and video gateway that features full interoperability with leading IP-PBXs, SoftSwitches and SIP platforms. The Gateway series offers superb voice and video quality, traditional telephony functionality, simple configuration, feature rich functionality and an additional video port that enables the gateway to act like a video surveillance gateway.
3: GXW-410 ABLE OFTWARE EATURES GXW– 410x FX0 Analog Gateway Series GXW-4104: 4 ports; 4 SIP accounts w/ choice of 3 SIP Server profiles IP settings GXW-4108: 8 ports; 8 SIP accounts w/ choice of 3 SIP Server profiles Round-robin port scheduling to ensure available lines to access PSTN...
NOTE: To access the configuration page, type the GXW IP address into the browser, stripping out the leading “0” because the browser will parse in octet. e.g. if the IP address is: 192.168.001.014, please type in: 192.168.1.14. Grandstream Networks, Inc. GXW-410x User Manual Page 12 of 37 Firmware 1.0.0.53...
CREEN SHOT OF CREEN Grandstream Device Configuration Password Login All Rights Reserved Grandstream Networks, Inc. 2005-2006 After login, the next configuration page is the Basic Configuration page, explained in detail in Table 6: Web Log-in Definition. 6: W ABLE EFINITIONS...
Page 14
November 4th at 2AM. The saving is 60 minutes (1hour). You may also access the Device Status page which provides details of the GXW product. The Device Status page terms are defined in Table 7: Status Page Definitions. Grandstream Networks, Inc. GXW-410x User Manual Page 14 of 37 Firmware 1.0.0.53...
ONFIGURATION Grandstream Device Configuration Password Login All Rights Reserved Grandstream Networks, Inc. 2005-2006 Advanced User configuration includes the end user configuration and advanced configurations including: SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous configuration. Grandstream Networks, Inc. GXW-410x User Manual Page 15 of 37 Firmware 1.0.0.53...
NAT IP address used in SIP/SDP message. Default is blank. STUN Server IP address or Domain name of the STUN (Simple Traversal of UDP through NATs) server. Grandstream Networks, Inc. GXW-410x User Manual Page 16 of 37 Firmware 1.0.0.53 Updated: 04/2007...
Page 17
The URL for the HTTP server used for firmware upgrade and configuration via HTTP. Server For example, ttp://provisioning.mycompany.com:6688/Grandstream/1.0.0.54 Here “:6688” is the specific TCP port that the HTTP server is listening at, it can be omitted if using default port 80.
Page 18
IP packets. In order to view this video feed, please follow instructions given under Video Surveillance chapter on page 23. RTSP Port By default it is 554. Grandstream Networks, Inc. GXW-410x User Manual Page 18 of 37 Firmware 1.0.0.53...
DTMF Dial Pause Default value is 100ms. Wait for Dial-tone Default is Y (Yes). When set to Yes, the gateway will wait till it hears dialtone from FXO line before dialing out the destination digits. Grandstream Networks, Inc. GXW-410x User Manual Page 19 of 37 Firmware 1.0.0.53...
Page 20
This setting allows you to make several options related to Facsimile. You can select the method: T.38 or Pass through (G711) You can select the fax transmission rates (2400/4800/7200/9600/12000/14400bps) You can enable or disable ECM (Error Checking Mode) Grandstream Networks, Inc. GXW-410x User Manual Page 20 of 37 Firmware 1.0.0.53...
If set to “No”, this feature is disabled. Echo Cancellation When set to Y, Echo cancellation is enabled. Channel specific Setting Channel specific settings mentioned below. Grandstream Networks, Inc. GXW-410x User Manual Page 21 of 37 Firmware 1.0.0.53 Updated: 04/2007...
Page 22
Syntax to USE this feature: prefix# (thats 99) + ch# (could be anything from 1 to 8) + dialing# will result in this call forwarded to FXO port (ch#) immediately. Grandstream Networks, Inc. GXW-410x User Manual Page 22 of 37 Firmware 1.0.0.53...
If the GXW-410x has an assigned PSTN telephone number, this field should be set Number to “Yes”. Otherwise, set it to “No”. If “Yes” is set, a “user=phone” parameter will be attached to the “From” header in SIP request. Grandstream Networks, Inc. GXW-410x User Manual Page 23 of 37 Firmware 1.0.0.53...
Page 24
Default is No. Use only if proxy supports 484 response. Early Dial Session Grandstream implemented SIP Session Timer. The session timer extension Expiration enables SIP sessions to be periodically “refreshed” via a SIP request (UPDATE, or re-INVITE. Once the session interval expires, if there is no refresh via a UPDATE or re-INVITE message, the session will be terminated.
Page 25
Similarly, the last Vocoder in this list can be entered by choosing the appropriate option in “Choice 8”. Default is Standard. Choose the selection to meet some special requirements from Special Feature Soft Switch vendors like Nortel, Broadsoft, etc. Grandstream Networks, Inc. GXW-410x User Manual Page 25 of 37 Firmware 1.0.0.53 Updated: 04/2007...
The device is rebooting now... You may re-login by clicking on the link below in 30 seconds. Click to re-login All Rights Reserved Grandstream Networks, Inc. 2005 The user can re-login to the unit after waiting for about 30 seconds. Grandstream Networks, Inc.
5. If the viewer is under NAT, go to Preferences->Demuxers->Access modules->RTP/RTSP, check “Advanced options” in the bottom. The option “Use RTP over RTSP (TCP)” will show. Check that option box. (Grandstream does NOT recommend this network environment) 6. Close the Preferences window and go to File->Open Network Stream:...
7: S IGURE CREEN SHOT OF IDEO URVEILLANCE * PC client side running VLC as monitoring station Grandstream Networks, Inc. GXW-410x User Manual Page 28 of 37 Firmware 1.0.0.53 Updated: 04/2007...
HTTP server. It can also be in IP address format. “:6688” is the TCP port the HTTP server listening to, default http server listens to port 80. “/Grandstream/1.0.0.53” is the RELATIVE directory to the root dir on HTTP web server.
OWNLOAD ERVER For users who do not have a local TFTP server, Grandstream provides a NAT-friendly TFTP server on the public Internet for users to download the latest firmware upgrade automatically. Please check the Services section of Grandstream’s Web site to obtain this TFTP server IP address. Alternatively, user can download and install a free TFTP or HTTP server in his LAN for a firmware upgrade.
Restoring the Factory Default Setting will DELETE all configuration information of the phone. Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will not take any responsibility if you lose all the parameters of setting and cannot connect to your VoIP service provider.
Scenario: a small business with traditional analog PBX lines and broadband access who want to extend their traditional PBX to virtually anywhere in the world, using the internet. (Any SIP End point, such as Grandstream BugeTone, HandyTone, GXP-2000 or GXV-3000 are needed in this scenario) Company A - Boston, MA...
IPPBX or IPPBX or SIP Server SIP Server IP/LAN IP/LAN GXW 410x GXW 410x Grandstream IP Phones Grandstream IP Phones Branch B – Denver, CO 4 employees Anywhere in the world Grandstream Networks, Inc. GXW-410x User Manual Page 33 of 37 Firmware 1.0.0.53...
DSP Digital Signal Processor. A sp ecialized CPU used for digital signal processing. Grandstream roducts all have DSP chips built inside. DTMF Dual Tone Multi Frequency. The standard tone-pairs used on telephone termi nals for dialing sing in-band signaling.
Page 35
Grandstream is the second-level domain, and and.com is the top level domain. FXO Foreign eXchange Office. An FXO device can be an analog phone, answering machine, fax, or anything that handles a call from the telephone company like AT&T. They should also operate the same way when connected to an FXS interface.
Page 36
SIP Session Initiation Protocol, An IP telephony signaling protocol developed by the IETF (RFC3261). SIP is a text-based protocol suitable for integrated voice-data applications. SIP is designed for voice ansmission and uses fewer resources and is considerably less complex than H.323. All Grandstream products are SIP based...
Page 37
VoIP Voice over the Internet. VoIP encompasses many protocols. All the protocols do some form of ignaling of call capabilities and transport of voice data from one point to another. e.g.: SIP, H.323, etc. Grandstream Networks, Inc. GXW-410x User Manual Page 37 of 37 Firmware 1.0.0.53...