Grandstream Networks GXW-410x User Manual page 16

Automatic Choose Yes to enable automatic upgrade and provisioning. In "Check for new firmware
every" field, enter the number of days to enable GXW-410x to check the server for
Upgrade
firmware upgrade or configuration in the defined period of days. When set to No, GXW-
410x will only do upgrade once at boot up.
"Always check for New Firmware." Check New Firmware only when F/W pre/suffix
changes"
Syslog Server The IP address or URL of System log server. This feature is especially useful for ITSP
(Internet Telephone Service Provider)
Select the ATA to report the log level. Default is NONE. The level is one of DEBUG,
Syslog Level
INFO, WARNING or ERROR. Syslog messages are sent based on the following
events:
The Syslog uses USER facility. In addition to standard Syslog payload, it contains the
following components:
GS_LOG: [device MAC address][error code] error message
Here is an example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000]
Ethernet link is up
NTP server URI or IP address of the NTP (Network Time Protocol) server, which will be used by the
phone to synchronize the date and time.
Grandstream Networks, Inc.
1. product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. inbound and outbound calls (INFO level)
6. registration status change (INFO level)
7. negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
GXW-410x User's Manual
Firmware 1.0.0.32
Page 16 of 34