Figure 14: Screen-Shot Of Grandstream Configuration Page - Grandstream Networks GXW-410x User Manual

Figure 14: Screen-shot of Grandstream Configuration Page

Grandstream Device Configuration
Basic
Status
Settings
Activate Profile:
Profile Name:
SIP Server:
Outbound Proxy:
Use DNS SRV:
User ID is phone number:
SIP Registration:
Unregister On Reboot:
Register Expiration:
NAT Traversal (STUN):
Proxy-Require:
Early Dial:
Session Expiration:
Min-SE:
Caller Request Timer:
Callee Request Timer:
Force Timer:
UAC Specify Refresher:
UAS Specify Refresher:
Force INVITE:
Enable 100rel:
Send Anonymous:
Preferred Vocoder:
(in listed order)
Grandstream Networks, Inc.
Advanced
FXO Lines
Settings
Yes No
SIP Server - 1
sip.server1.com
No Yes
No Yes
Yes No
Yes No
60
(in minutes. default 1 hour, max 45 days)
No Yes
No Yes (use "Yes" only if proxy supports 484 response)
180
(in seconds. default 180 seconds)
90
(in seconds. default and minimum 90 seconds)
Yes No (Request for timer when making outbound calls)
Yes No (When caller supports timer but did not request one)
Yes No (Use timer even when remote party does not support)
UAC UAS
UAC UAS (When UAC did not specify refresher tag)
Yes No (Always refresh with INVITE instead of UPDATE)
Yes No
No Yes (caller ID will be blocked if set to Yes)
PCMU
choice 1:
PCMA
choice 2:
G.723.1
choice 3:
GXW-410x User's Manual
Firmware 1.0.0.32
Channels Profile 1
(Optional, name of your profile)
(Server domain name or IP address)
(Domain name or IP address if in use)
Omit (Recommended)
GSM
choice 5:
PCMU
choice 6:
PCMU
choice 7:
Profile 2 Profile 3
Page 22 of 34