Grandstream Networks GXW-410x User Manual
Analog ip gateway 4 or 8 fxo ports w/video surveillance
Hide thumbs
Also See for GXW-410x:
- User manual (36 pages) ,
- Setup manual (13 pages) ,
- Quick installation manual (9 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Setup Manual
Advertisement
Table of Contents
Related Manuals for Grandstream Networks GXW-410x
Summary of Contents for Grandstream Networks GXW-410x
- Page 1 Grandstream Networks, Inc. Analog IP Gateway GXW-410x 4 or 8 FXO Ports w/Video Surveillance GXW-410x User’s Manual www.grandstream.com Firmware Version 1.0.0.53 support@grandstream.com VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030...
-
Page 2: Table Of Contents
..............................5 ARRANTY GXW-410 ........................6 ONNECTING THE APPLICATION DESCRIPTION ........................8 Functional Diagram of IP-PBX & GXW-410x..................8 GXW–400x & GXW–410x Scenario/Toll- Free Calling Between Locations .......... 9 FXS and FXO Gateway Configuration Example..................9 FEATURES..............................10 ......................10 OFTWARE... - Page 3 TABLE OF FIGURES GXW-410X USER MANUAL 1: D GXW-410 .................... 6 IGURE IAGRAM OF ANEL 2: D GXW-410 ..................7 IGURE IAGRAM OF ISPLAY ANEL 3: F IP-PBX & GXW-410 ................8 IGURE UNCTIONAL IAGRAM OF 4: S GXW-410 ................13...
-
Page 4: Gxw-410X User Manual
ELCOME Thank you for purchasing the Grandstream GXW–410x IP Analog FXO Gateway. The GXW–410x is a cost effective, easy to use and easy to configure IP communications solution for any business. The GXW–410x supports popular voice codecs and is designed for full SIP compatibility and interoperability... -
Page 5: Packaging
Grandstream, contact your Gra ndstream Sales and Service Representative for a RMA (Return Materials Authorization) number. Grandstream reserves the right to remedy warranty policy without prior notification. Grandstream Networks, Inc. -
Page 6: Onnecting The Gxw-410
LAN (or PC) Connect your PC to this port. It will then be assigned an IP address from your Router/DHCP Server. The GXW-410x acts as a switch only. WAN (or LAN) Connect to the internal LAN network or Public Internet. - Page 7 OFF while the new files are written. The entire process may take between 5 to 15 minutes. The firmware upgrade is complete when you can login into the web configuration pages. Grandstream Networks, Inc. GXW-410x User Manual Page 7 of 37 Firmware 1.0.0.53...
-
Page 8: Application Description
A. IP PBX / SIP Server with GXW410x A SIP proxy server such as Asterisk or a SIP registrar server can be deployed with the GXW-410x series. In this environment, the SIP server handles SIP registration and call control and the GXW-410x processes media conversion between IP and PSTN calls. -
Page 9: Gxw-400X & Gxw-410X Scenario/Toll- Free Calling Between Locations
Local SIP Listen port (For VOIP to PSTN calls) - 5060++ Profile 1 SIP Server - Set it to IP Address of GXW400x SIP Registration - No NAT traversal - No Grandstream Networks, Inc. GXW-410x User Manual Page 9 of 37 Firmware 1.0.0.53 Updated: 04/2007 VoIPon www.voipon.co.uk sales@voipon.co.uk... -
Page 10: Features
For more information regarding this setup, email Grandstream technical support at support@grandstream.com EATURES GXW–410x is a next generation IP voice and video gateway that features full interoperability with leading IP-PBXs, SoftSwitches and SIP platforms. The Gateway series offers superb voice and video quality, traditional telephony functionality, simple configuration, feature rich functionality and an additional video port that enables the gateway to act like a video surveillance gateway. - Page 11 Polarity Reversal / Yes (Detection only). The PSTN lines will need to be subscribed to PR Wink service from the Service Provider. GXW-410x: EN55022 Class B, CFR Part 15 Class B, EN55024; GXW-4104: FCC, CE (in addition) Safety GXW-410x: EN60950-1 GXW-4108: UL60950-1 (in addition) Grandstream Networks, Inc.
-
Page 12: Configuration Guide
ONFIGURATION WITH ROWSER The GXW-410x has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow a user to configure the IP phone through any common web browser. Examples of GUI interfaces can be downloaded @ http://www.grandstream.com/user_manuals/GUI/GUI_GXW-410x. -
Page 13: End User Configuration
ONFIGURATION Once this HTTP request is entered and sent from a Web browser, the GXW-410x will respond with a login screen. There are two default passwords for the login page: User Level: Password: Webpages allowed: End User Level Only Status and Basic Settings... - Page 14 You may also access the Device Status page which provides details of the GXW product. The Device Status page terms are defined in Table 7: Status Page Definitions. Grandstream Networks, Inc. GXW-410x User Manual Page 14 of 37 Firmware 1.0.0.53...
-
Page 15: Advanced User Settings
This field shows whether the PPPoE connection is running if connected to DSL modem. Detected NAT Type This field shows what kind NAT the GXW-410x is connected to via its WAN port. It is based on STUN protocol. DVANCED ETTINGS... - Page 16 Factory Reset as the only option to renew access. Local RTP port This parameter defines the local RTP-RTCP port pair the GXW-410x will listen and transmit. It is the base RTP port for channel 0. When configured, channel 0 will use this port _value for RTP and the port_value+1 for its RTCP;...
- Page 17 Here “:6688” is the specific TCP port that the HTTP server is listening at, it can be omitted if using default port 80. Note: If Auto Upgrade is set to No, GXW-410x will only do HTTP download once at boot Firmware IP address or domain name of firmware server.
- Page 18 IP packets. In order to view this video feed, please follow instructions given under Video Surveillance chapter on page 23. RTSP Port By default it is 554. Grandstream Networks, Inc. GXW-410x User Manual Page 18 of 37 Firmware 1.0.0.53 Updated: 04/2007 VoIPon www.voipon.co.uk...
-
Page 19: Configuring The Fxo Channels
Wait for Dial-tone Default is Y (Yes). When set to Yes, the gateway will wait till it hears dialtone from FXO line before dialing out the destination digits. Grandstream Networks, Inc. GXW-410x User Manual Page 19 of 37 Firmware 1.0.0.53... - Page 20 You can select the method: T.38 or Pass through (G711) You can select the fax transmission rates (2400/4800/7200/9600/12000/14400bps) You can enable or disable ECM (Error Checking Mode) Grandstream Networks, Inc. GXW-410x User Manual Page 20 of 37 Firmware 1.0.0.53 Updated: 04/2007 VoIPon www.voipon.co.uk...
- Page 21 If set to “No”, this feature is disabled. Echo Cancellation When set to Y, Echo cancellation is enabled. Channel specific Setting Channel specific settings mentioned below. Grandstream Networks, Inc. GXW-410x User Manual Page 21 of 37 Firmware 1.0.0.53 Updated: 04/2007 VoIPon www.voipon.co.uk sales@voipon.co.uk...
- Page 22 Syntax to USE this feature: prefix# (thats 99) + ch# (could be anything from 1 to 8) + dialing# will result in this call forwarded to FXO port (ch#) immediately. Grandstream Networks, Inc. GXW-410x User Manual Page 22 of 37 Firmware 1.0.0.53 Updated: 04/2007 VoIPon www.voipon.co.uk...
-
Page 23: Profile
Default is No. If set to Yes the client will use DNS SRV to look up server. User ID is Phone If the GXW-410x has an assigned PSTN telephone number, this field should be set Number to “Yes”. Otherwise, set it to “No”. If “Yes” is set, a “user=phone” parameter will be attached to the “From”... - Page 24 IP address and port in all of its SIP and SDP messages. If the NAT Traversal field is set to “Yes” with no specified STUN server, the GXW-410x will periodically (every 20 seconds or so) send a blank UDP packet (with no payload data) to the SIP server to keep the “hole”...
- Page 25 Target Contact the transferred target’s Contact header information. Preferred The GXW-410x supports up to 5 different Vocoder types including G.711 A-/U-law, Vocoder GSM, G.723.1, G.729A/B. The user can configure Vocoders in a preference list that will be included with the same preference order in SDP message. The first Vocoder in this list can be entered by choosing the appropriate option in “Choice 1”.
-
Page 26: Saving The Configuration Changes
ONFIGURATION HANGES Once a change is made, press the “Update” button in the Configuration Menu. The GXW-410x will display the following screen to confirm that the changes have been saved. To activate changes, reboot or power cycle the GXW-410x after all changes are made. -
Page 27: Video Surveillance
IDEO URVEILLANCE The GXW-410x can be used with an Analog Surveillance CCD Camera to perform video surveillance function. This application should be used in a LAN environment or when both sides have public IP address. IDEO URVEILLANCE ROCEDURES Gateway side: 1. - Page 28 7: S IGURE CREEN SHOT OF IDEO URVEILLANCE * PC client side running VLC as monitoring station Grandstream Networks, Inc. GXW-410x User Manual Page 28 of 37 Firmware 1.0.0.53 Updated: 04/2007 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030...
-
Page 29: Firmware Upgrade
HTTP server. It can also be in IP address format. “:6688” is the TCP port the HTTP server listening to, default http server listens to port 80. “/Grandstream/1.0.0.53” is the RELATIVE directory to the root dir on HTTP web server. -
Page 30: Upgrade Through Tftp
5. Reboot or power cycle the unit. If the configured updating server is found and a new code image is available, the GXW-410x will retrieve the new image files by downloading them into the GXW-410x’s SRAM. During this stage, the GXW- 410x’s LED will blink until the checking/downloading process is completed. -
Page 31: Restore Factory Default Setting
Restoring the Factory Default Setting will DELETE all configuration information of the phone. Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will not take any responsibility if you lose all the parameters of setting and cannot connect to your VoIP service provider. -
Page 32: Examples Of Gxw-410X Configurations
Scenario: a small business with traditional analog PBX lines and broadband access who want to extend their traditional PBX to virtually anywhere in the world, using the internet. (Any SIP End point, such as Grandstream BugeTone, HandyTone, GXP-2000 or GXV-3000 are needed in this scenario) Company A - Boston, MA... - Page 33 CONNECTED WITH AN ERVER AND IDEO URVEILLANCE Scenario: The GXW-410x offers an additional video surveillance port which can be configu red for surveillance. It is the only small business analog gateway that offers this security feature. Branch A – Boston, MA...
-
Page 34: Glossary Of Terms
DSP Digital Signal Processor. A sp ecialized CPU used for digital signal processing. Grandstream roducts all have DSP chips built inside. DTMF Dual Tone Multi Frequency. The standard tone-pairs used on telephone termi nals for dialing sing in-band signaling. - Page 35 Grandstream is the second-level domain, and and.com is the top level domain. FXO Foreign eXchange Office. An FXO device can be an analog phone, answering machine, fax, or anything that handles a call from the telephone company like AT&T. They should also operate the same way when connected to an FXS interface.
- Page 36 SIP Session Initiation Protocol, An IP telephony signaling protocol developed by the IETF (RFC3261). SIP is a text-based protocol suitable for integrated voice-data applications. SIP is designed for voice ansmission and uses fewer resources and is considerably less complex than H.323. All Grandstream products are SIP based...
- Page 37 VoIP Voice over the Internet. VoIP encompasses many protocols. All the protocols do some form of ignaling of call capabilities and transport of voice data from one point to another. e.g.: SIP, H.323, etc. Grandstream Networks, Inc. GXW-410x User Manual Page 37 of 37 Firmware 1.0.0.53...