Figure 5: Web Log-In Definitions - Grandstream Networks GXW-410x User Manual

Figure 5: Web Log-in Definitions

Web Access
Web Port
End User Password
IP Address
Time Zone
In addition to the Basic Settings configuration page, the end user also has access to the Device Status
page. The following is a screen shot of the device Status Page.
Grandstream Networks, Inc.
Select HTTP or secure HTTPS protocol for Web Access
By default, HTTP uses port 80 and HTTPS uses port 443. This field is
for customizable web port.
This contains the password to access the Web Configuration Menu.
This field is case sensitive with a maximum length of 25 characters.
There are two modes under which the GXW-410x can operate:
If DHCP mode is enabled, then all the field values for the Static
IP mode are not used (even though they are still saved in the Flash
memory.) The GXW-410x will acquire its IP address from the first
DHCP server it discovers from the LAN it is connected.
To use the PPPoE feature the PPPoE account settings need to
be set. The GXW-410x will attempt to establish a PPPoE session if any
of the PPPoE fields is set.
If Static IP mode is enabled, then the IP address, Subnet Mask,
Default Router IP address, DNS Server 1 (primary), DNS Server 2
(secondary) fields will need to be configured. These fields are set to
zero by default.
This parameter controls how the date/time is displayed according to the
specified time zone.
GXW-410x User's Manual
Firmware 1.0.0.32
Page 11 of 34