Table 6: Web Log­in Definitions (Basic Settings Page) - Grandstream Networks GXW410x User Manual

After login, the following page is the Basic Configuration page, explained in detail in Table 6: Web
Log­in Definition.
T 6: W L
ABLE EB OG
Web Access
Web Port
End­user Password
IP Address
DHCP hostname
DHCP domain
DHCP vendor class ID
PPPoE account ID
PPPoE password
PPPoE Service Name
Preferred DNS server
Time Zone
Allow DHCP Option 2
to override Time Zone
Settings
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
­ D (B S
IN EFINITIONS ASIC ETTINGS
Select HTTP or secure HTTPS protocol for Web Access
By default, HTTP uses port 80 and HTTPS uses port 443. This field is for customizable
web port.
This contains the password to access the End­user Web Configuration Menu (Status and
Basic Settings). This field is case sensitive with a maximum length of 25 characters.
There are two modes to operate the GXW410x:
DHCP mode: all the field values for the Static IP mode are not used (even though they are
still saved in the Flash memory.) The GXW410x acquires its IP address from the first
DHCP server it discovers from the LAN it is connected.
Using the PPPoE feature: set the PPPoE account settings. The GXW410x will establish a
PPPoE session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP address, DNS
Server 1 (primary), DNS Server 2 (secondary) fields.
This option specifies the name of the client. This field is optional but may be required by
some Internet Service Providers. Default is blank.
This option specifies the domain name that client should use when resolving hostnames
via the Domain Name System. Default is blank.
Used by clients and servers to exchange vendor­specific information. Default is
Grandstream GXW410x.
PPPoE user name. Necessary if ISP requires you to use a PPPoE (Point to Point Protocol
over Ethernet) connection.
PPPoE account password.
This field is optional. If your ISP uses a service name for the PPPoE connection, enter the
service name here. Default is blank.
This field will let the user enter a preferred DNS server to be used instead of the one
acquired by the service provider.
Controls how the date/time is displayed according to the specified time zone.
Default is No. If set to Yes, time zone settings will originate from the DHCP server.
P )
AGE