Add Favorites; Scan; Auto Search; Manual Searching - SMART MX56 Manual

3.2. Add Favorites

Use Add Favorites ,you can designate the
channels of the current TV/Radio list as favorite
channels.
Move cursor to the required channel with Up/Down
key, and then press Red key on the remote
controller to set channel as favorites. If Red key
is pressed again the selected channel is un-selected
from your favorite list.
To select Radio channel in the TV list, use TV
/Radio key on the remote controller, and use TV
/Radio key to select TV channel in the Radio
channel list.
When you want exit from this menu, please press
MENU key, you can see a dialogue (Fig 3.4), this dialogue let you confirm your
operation.
You can see the favorite list if you press the Fav key while you are watching TV
(or listening Radio channel) in normal state.
3.3 Favorite Manager
The function is basically the same as the
channel manager menu
Lock: Same as the Lock function in
menu. Skip: Same as the skip function in
menu. Rename: Same as the rename function in
Manager
function in Channel Manager menu
Fig3.3
Fig3.4
Fig3.5
Channel Manager
Channel Manager
Channel
menu. Sort: Same as the Sort

4. Scan

Use the main menu, you can press left or right
key to select Scan icon. (Fig 4.1)
From this menu, we can select Auto Searching,

Manual Searching

and
Setting items.

4.1 Auto Search

From Scan menu (Fig 4.1), you can select Auto
Searching menu (Fig 4.2).User can select this
menu to search the whole programs of the default
frequency range.
4.2 Manual Searching
From Scan menu (Fig 4.1), you can select
Manual Searching menu (Fig 4.3).
Set the TP Frequercy and Bandwidth
Set Auto Mode to NO .
Set Trans Mode (Fig 4.4) and Guard
Interval (Fig 4.5)parameter.
If there is some signal displayed in Signal
Power and Signal Quality items. press
RED key to search program. If you can not see any signal, please check
the parameter setting
Fig4.4
Timer
Fig4.1
Fig4.2
.
Fig4.3
Fig4.5