Extended Settings And Functions; Channel Search - SMART CX72 User Manual

Extended Settings and Functions

7 Extended Settings and Functions
7.1

Channel Search

If you want to start channel scan during on-going operation (e.g. if your
cable network provider changed channel allocation) then you have two
possibilities:
7.1.1 Automatic Channel Scan
1. Press the key MENU.
2. Select the menu Installation by using the keys PR+ and PR-.
3. Select Auto Search and confirm by pressing OK.
4. Further procedure is the same as described in section 5.3.3 (Auto
Scan) on page 21.
7.1.2 Manual Channel Scan
Instead of using Auto Scan, you can also manually set the DVB-C chan-
nels:
1. Press the key MENU.
2. Select the menu Installation
by using the keys PR+ and PR-
.
3. Select Quick Search and con-
firm by pressing OK. The win-
dow on the right will open.
Signal strength and signal quality are displayed on the bottom of the win-
dow. Now you can perform manual channel scan.
 Select the Scan Mode, either By Channel or By Frequency.
Scan Mode By Channel
1. Select the desired channel (frequency) at Channel No. by using the
keys and
2. Enter at Symbol Rate the value predetermined by your cable network
provider, using the numeric keys of the remote control and the keys
and
44
.
.
smart CX72