Icom IC-R6 Instruction Manual page 62

9
SET MODE
D Expand set mode (EXPAND)
Turn the Expand set mode ON or OFF.
• OFF : Displays only the regular Set mode.
• ON : Displays the regular set mode and the Expand
set mode.
D Key lock effect (LOCK)
Even while the key lock function is ON, the volume control,
squelch adjustment and monitor key ([SQL]) is still usable.
Usable keys can be set to one of four groups.
[ ] and [FUNC]+[
locked state. However, these switches are not effected by
this setting.
• NORMAL : Volume control, squelch adjustment and
monitor key are accessible.
• NO SQL : The squelch adjustment and monitor key are
accessible.
• NO VOL : Volume control is accessible.
volume control is not locked.)*
: No key function is usable, except [ ] and
• ALL
[FUNC]+[
*"NO" indicates the function is not locked.
49
(default: OFF)
](BAND) are also usable during the
(default: NORMAL)
(The function of [SQL] is not locked.)*
(The function of
](BAND).
D Dial speed acceleration (SPEED)
The dial speed acceleration automatically speeds up the
tuning dial speed, when rotating [DIAL] rapidly. (default: ON)
• OFF : The dial speed acceleration is turned OFF.
• ON : The dial speed acceleration is tuned ON.
D Monitor switch action (MONI)
The monitor switch, [SQL], can be set as a 'sticky' switch.
When set to the sticky condition, each push of [SQL] toggles
the monitor function ON or OFF.
• PUSH : Hold down [SQL] to monitor the frequency.
• HOLD : Push [SQL] momentarily to monitor the fre-
quency and push momentarily again to cancel it.
(default: PUSH)