Memory Bank Selection - Icom IC-R6 Instruction Manual

5
MEMORY CHANNELS

■ Memory bank selection

q Push [V/M] to select the memory mode.
w While holding down [BAND], rotate [DIAL] to select a
desired bank.
• The bank can also be selected by pushing [BAND] repeatedly.
• Only banks with entries are displayed.
21
[DIAL]
Regular memory
channels
Only banks with
entries are displayed
Auto write channels
e Rotate [DIAL] to select the bank channel.
• Only programmed channels are displayed.
[DIAL]
r To return to a regular memory channel, while holding
down [BAND] then rotate [DIAL], or repeatedly push
[BAND].
Bank initial
Bank channel number