Icom IC-R6 Instruction Manual page 13

3. Starting scan
Push [SCAN](MODE) to start the scan.
• Rotate [DIAL] to change the scanning direction.
In the VFO mode
• Full/Band scan
• Program link
Program scan
4. Cancelling scan
Push [SCAN](MODE) again to stop the scan.
In the memory mode
• All memory/All bank
bank link scan
• Bank scan
QUICK REFERENCE GUIDE
✔ For your information
The memory channel number you program the scan edges
into correlates "PROGxx" as follows:
00A/00B: Selects "PROG 00" to scan between frequencies
programmed in channels 00A and 00B.
01A/01B: Selects "PROG 01" to scan between frequencies
programmed in channels 01A and 01B.
23A/23B: Selects "PROG 23" to scan between frequencies
programmed in channels 23A and 23B.
24A/24B: Selects "PROG 24" to scan between frequencies
programmed in channels 24A and 24B.
•
•
•
•
VII