Icom IC-7400 Instruction Manual page 44

4
RECEIVE AND TRANSMIT
D D Editing a memory keyer
The contents of the memory keyer memories can be
set using the memory keyer edit menu. The memory
keyer can memorize and re-transmit 4 CW key codes
for often-used CW sentences, contact numbers, etc.
Total capacity of the memory keyer is 50 characters
per memory channel.
• Programming contents
q Push [MENU] to select
select the memory keyer menu.
w Push [F3
] to select edit menu.
• Memory keyer contents of the Channel 1 (
cated.
• Push [F5] to manually increment the contest number.
e Push [F1] to select the desired memory keyer chan-
nel to be edited.
r Input the desired character by rotating the tuning
dial or by pushing the keypad for number input.
• Selectable characters (with the tuning dial);
NOTE:
" " is used to transmit a following word with no
space such as
such as ^AR, and the string "
space.
" " is used to insert the CW contact number. The
contact number automatically increments by 1.
This function is only available for one memory
keyer channel at a time. Memory keyer channel
M2 used " " by default.
t Push [F2
] or [F3
wards or forwards, respectively.
y Repeat steps r and t to input the desired charac-
ters.
u Push [MENU] 2 times to return to
Pre-programmed contents
CH
31
, then push [F4
) is indi-
. Put " " before a text string
AR
" is sent with no
AR
] to move the cursor back-
.
Contents
• Edit menu
] to
F 1
Move cursor left/right
Select M1 to M4
¥ M2 default indication
¥ M3 default indication
¥ M4 default indication
Example display— when inputting QSL TU
DE JA3YUA TEST into M3.
F 2 F 3 F 4
Input space
Clear character
When inputting an asterisk,
the counter is incremented by 1.
F 5