Icom IC-7400 Instruction Manual page 100

11
SET MODE
I General set mode (continued)
36.
This item sets the data transfer rate. 300, 1200, 4800,
9600, 19200 bps and "Auto" are available.
: Auto baud rate (default)
: 300 bps
: 1200 bps
: 4800 bps
: 9600 bps
: 19200 bps
When "Auto" is selected, the baud rate is automati-
cally set according to the connected controller or re-
mote controller.
37.
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-7400's address is 66h.
When 2 or more IC-7400's are connected to an op-
tional CT-17 -
CI V LEVEL CONVERTER
dial to select a different address for each IC-7400 in
the range 01h to 7Fh.
38.
Transceive operation is possible with the IC-7400
connected to other Icom HF transceivers or receivers.
: Transceive ON (default)
: Transceive OFF
When "ON" is selected, changing the frequency, op-
erating mode, etc. on the IC-7400 automatically
changes those of connected transceivers (or re-
ceivers) and vice versa.
39.
When connecting the IC-7400 to the IC-735 for trans-
ceive operation, you must change the operating fre-
quency data length to 4 bytes.
• This item must be set to "ON" only when operating the
transceiver with the IC-735.
: 4 bytes of frequency data
: 5 bytes of frequency data (default)
87
, rotate the tuning