Log Pulse - Furuno SC-50S Operator's Manual

2.8.2

Log pulse

This equipment provides SOG (speed over ground) in high accuracy. It converts
an SOG value to a pulse signal and outputs at the rate of 200 or 400 pulses/nm.
1. Press the MENU key.
2. Choose I/O SETUP and then press the ENT key.
3. Choose LOG PULSE and then press the ENT key.
4. Choose 200p/nm or 400p/nm as appropriate and then press the ENT key.
5. Press the DISP key to close the menu.
200p/nm
400p/nm
Log pulse options
2. OPERATION
2-13