Demonstration Mode - Furuno SC-50S Operator's Manual

2. OPERATION
2.9.5

Demonstration mode

The demonstration mode provides simulated operation of the equipment.
1. Press the MENU key to open the menu.
2. Choose SYS SETUP and then press the ENT key.
3. Choose DEMO and then press the ENT key.
4. Choose ON or OFF as appropriate and then press the ENT key.
5. Press the DISP key to close the menu.
The indication SIM appears at the top of the screen when the demonstration
mode is active. When the demonstration mode is first made active,
SIMULATION MODE appears when the power is turned on and it is erased
when any key is pressed.
2-16