Mounting Considerations; Desktop, Overhead Mounting - Furuno SC-50S Operator's Manual

1. INSTALLATION
1.3 Mounting the Display Unit
1.3.1

Mounting considerations

Consider the following points when choosing a mounting location.
• Choose a location where vibration and shock are minimal.
• Install the unit well away from locations subject to rain and water splash.
• Locate the unit away from air conditioner vents.
• Keep the unit out of direct sunlight because of heat that can build up inside its
cabinet.
• Choose a well-ventilated location.
• Leave sufficient space around the unit to permit access for maintenance. See
the outline drawing for recommended maintenance space.
• Choose a location where it can be easily operated.
1.3.2

Desktop, overhead mounting

1. Fasten the hanger to the mounting location with four tapping screws
(supplied). See the outline drawing for mounting dimensions.
2. Screw the knobs into the display unit.
3. Set display unit to the hanger and tighten the knobs.
4. Run the ground wire between the ground terminal on the display unit and the
ship's superstructure.
1-14
Desktop
Desktop and overhead mounting
Overhead