Alarm Setup - Furuno SC-50S Operator's Manual

2. OPERATION
2.5

Alarm Setup

The SC-50S can alert you with audible and visual alarms when GPS signal,
DPGS signal and WAAS signal are lost. To set the DGPS alarm, do the
following:
1. Press the MENU key to show the menu.
2. Choose ALARMS and then press the ENT key.
3. BUZZER is selected; press the ENT key.
4. Use ▲ or ▼ to choose buzzer type desired and then press the ENT key.
SHORT:
LONG:
CONSTANT: Continuous beep
5. Press the ENT key.
6. DPGS is selected; press the ENT key.
7. Use ▲ or ▼ to choose OFF or ON as appropriate.
8. Press the ENT key.
9. Press the DISP key to close the menu.
2-6
ALARMS
BUZZER :
DGPS : OFF
Alarm menu
SHORT
LONG
CONSTANT
Buzzer options
Two short beeps
Three long beeps
OFF
DGPS alarm options
LONG
ON