Trip Menu - Furuno SC-50S Operator's Manual

2.12

TRIP Menu

The TRIP menu functions to
• Choose the indication to show on the SOG/STW display
• Choose source of distance run
• Reset distance run to zero
• Smooth the tide drift indication
• Enter smoothing for rate of turn and display range scale
1. Press the MENU key to display the main menu.
2. Choose TRIP MENU and then press the ENT key.
3. Choose DISTANCE DISP and then press the ENT key.
4. Choose what to display on the Speed display; distance run (DSTNC) or tide
direction and speed (DRIFT). Press the ENT key.
5. Choose DISTANCE CALC and then press the ENT key.
6. Choose the source for distance run; GPS, VLW (distance traveled through
water) or VBW (Dual ground/water speed). (VLW requires DS-80 type
Doppler speed log and VBW requires Current indicator or Doppler speed
log.) Press the ENT key.
7. Choose DRIFT AVG. and then press the ENT key.
8. If tide current and speed data is unstable, enter a smoothing figure to
stabilize the data. The higher the figure the more smoothed the data. A
setting between 0 (no smoothing) and 9999 (seconds) is available.
9. Choose SMOOTH ROT and then press the ENT key.
10. Use the Omnipad to enter rate of turn smoothing rate. Choose location with
◄ or ►; change value with ▲ or ▼. The setting range is 0.1 to 30.0
(seconds).
11. Press the ENT key.
12. Choose ROT RANGE and the press the ENT key.
13. Choose the range of the ROT graph from among 30, 60 and 90 (degree/min.)
and then press the ENT key.
14. Press the DISP key to close the menu.
TRIP MENU
DISTANCE DISP : DSTNC
DISTANCE CALC: GPS
RESET DISTANCE?
DRIFT AVG : 10SEC
SMOOTH ROT: 2.5 SEC
ROT RANGE: 60°/MIN
TRIP menu
2. OPERATION
2-21