3.4 Program Number; Clearing Data - Furuno SC-50S Operator's Manual

3.4 Program Number

You may display the program number as follows:
1. Press the MENU key to open the menu.
2. Choose SOFT VER. and then press the ENT key.
3. Press the DISP key to close the program version no. display.
3.5

Clearing Data

You may clear GPS data and system data all at once or individually as follows:
1. Press the MENU key to open the menu.
2. Choose ERASE and then press the ENT key.
3. Choose GPS DATA?, SYSTEM DATA? or ALL BACKUP DATA? (clears GPS
and SYSTEM data) as appropriate. One of the following displays appears
depending on your selection.
4. Press ◄ to choose YES and then press the ENT key to erase. After data is
erased the message "Completed erasing. Turn off the unit." is displayed.
Note: MOUNTING, DIRECTION and LANGUAGE in the INST menu, HDG
5. Turn off and on the power.
SOFTWARE VERSION
DISPLAY
PROCESS
GPS1
GPS2
GPS3
** = Program version no.
Program number display
ERASE GPS DATA?
ARE YOU SURE?
YES NO
ERASE SYSTEM
DATA? (DEFAULT)
ARE YOU SURE?
YES NO
Prompts for erasure of data
RESTORATION and HDG BACKUP in the OTHERS menu and
OFFSET in the HEADING SETUP menu are not cleared.
3. MAINTENANCE, TROUBLESHOOTING
205-1342-**.**
205-1341-**.**
4850263***
4850263***
4850263***
ERASE ALL BACKUP
DATA? (DEFAULT)
ARE YOU SURE?
YES NO
3-7