How To Access The Alert Log - Furuno SC-130 Operator's Manual

2. OPERATION
2.11.4

How to access the alert log

The alert log shows the latest 50 alerts. When the log becomes full, the oldest entry is
erased to make room for current alerts. To access the alert log, do the following:
1. Open the [MENU].
2. Select [ALERT], then press the ENT key.
3. Select [ALERT LOG], then press the ENT key.
4. Press
5. Press the DISP key to close the [ALERT LOG].
Note: The [ALERT LOG] can also be accessed from the [LIST] display. Press the
LIST key to cycle through the lists.
How to interpret the alert log
No.
1 DATUM, OS
coordinates,
Calculation sta-
tus, [HDG],
[ROT]
2 Alert code and
message
3 Alert number
4 [ACK]
5 Alert priority
6 Alert time /
coordinates
7 [RECT]
2-18
CAUTION
440301 DEAD R RECKONING
or to scroll up or down through the alert log.
Indication
name
See section 2.11.3.
Alert code appears in six digit format.
Note: A full list of alert codes, meaning and measure is includ-
ed at "ALERT LIST" on page AP-4.
Number assigned to the selected alert by the alert log. Up to
50 alerts are stored.
Note: This is not an alert code.
Time and date the alert was acknowledged.
The priority level assigned to the selected alert. Displayed as
"WARNING" or "CAUTION".
Time of alert, coordinates at time of alert.
Time and date alert was rectified.
NORMAL
Description