Deck Mount - Furuno SC-50S Operator's Manual

1. INSTALLATION
1.2.3

Deck mount

Orient the processor unit as shown below and fix it to the mounting location with
four tapping screws (M5x20). You will set the orientation later on the menu.
Mount processor unit
so reference
direction is within
± 2.5 ° of
fore-and-aft line.
Name plate
Port
Port
1-12
Connectors
Processor Unit, top view
Bow
Mounting Method: "Floor"
Mounting Direction: A
Starboard
DIRECTION "A"
Stern
Bow
Mounting Method: "Floor"
Mounting Direction: C
Starboard
DIRECTION "C"
Stern
Processor unit orientation, deck mounting
Reference Direction
POWER switch
(power lamp)
Bow
Mounting Method: "Floor"
(Deck)
Mounting Direction: B
Starboard
Port
Stern
Bow
Mounting Method: "Floor"
(Deck)
Mounting Direction: D
Starboard
Port
Stern
(Deck)
DIRECTION "B"
(Deck)
DIRECTION "D"