Dgps Alarm Setup - Furuno SC-50 Operator's Manual

3. OPERATION
3.5

DGPS Alarm Setup

The SC-50 can alert you with audible and visual alarms when GPS data, DPGS
data and WAAS data are lost. To set the DGPS alarm, do the following:
1. Press the [MENU] key to show the menu.
2. Choose ALARMS and then press the [ENT] key.
3. BUZZER is selected; press the [ENT] key.
4. Use ▲ or ▼ to choose buzzer type desired and then press the [ENT] key.
SHORT:
LONG:
CONSTANT: Continuous beep
5. Press the [ENT] key.
6. Use ▼ to choose DGPS and then press the [ENT] key.
7. Use ▲ or ▼ to choose OFF or ON as appropriate.
8. Press the [ENT] key.
9. Press the [DISP] key to close the menu.
3-6
MAIN MENU
ALARMS
MESSAGES
GPS SETUP
SYS SETUP
SOFT VER.
OTHERS
Main menu
ALARMS
BUZZER : LONG
DGPS : OFF
Alarm menu
SHORT
LONG
CONSTANT
Buzzer options
Two short beeps
Three long beeps
OFF
ON
DGPS alarm options
Get other manuals https://www.bkmanuals.com
SATELLITE
WAAS/DGPS
I/O SETUP
INST MENU
ERASE
TRIP MENU