Procedure For Reinstallation - Oce VarioPrint 1105 User Manual

Cms replacement instructions
Hide thumbs Also See for VarioPrint 1105:
Table of Contents

Advertisement

PF-701

Procedure for reinstallation

Note
The removing/reinstalling methods of the pick-up roller unit and the sep-
aration roller unit are the same for all of the trays 3, 4 and 5. The expla-
nation here is made of the examples of the tray 3.
After completion of installation, be sure to rotate the pick-up roller in the
paper feed direction (clockwise as seen from the front side) to check to
see if the paper feed roller and the belt rotate smoothly. The rotation is
restricted only to the paper feed direction (clockwise as seen from the
front side) and be careful not to rotate it counterclockwise.
Be careful that the pick-up roller unit and the separation roller unit are dif-
ferent in the direction for the main body and the PF-701.
There are two types of pick-up roller unit and separation roller unit by the
materials of them. However, the procedure of them is the same.
CMS Replacement instructions
4
4-9

Advertisement

Table of Contents
loading

Table of Contents