Meaning Of Symbols; Operations Before Replacing Any Part - Oce VarioPrint 1105 User Manual

Introduction

Meaning of symbols

Symbol

Operations before replacing any part

7 CAUTION
Ignoring this cautions could cause injury or damage to property.
% Do not ignore this safety advices.
Warning
When conducting a part replacement operation, be sure to get
guidance from the customer engineer. And also, read the CMS
Replacement Instructions carefully before conducting a part re-
placement operation by following the prescribed procedure and
using tools also prescribed. Be sure not to conduct any opera-
tions other than those described in the CMS Replacement In-
structions. When the prescribed procedure and tools are not
employed, this may cause damage to the copier or you may get
injured.
Before starting operations, be sure to unplug the power cords
of the copier main body and the optional equipment from the
power outlet.
When the power cord is plugged into the power outlet, some
electrical components may be energized even if the power
switch is turned off. So, be careful not to get an electric shock.
The temperature gets high in the vicinity of the fusing unit. Be
careful not to come into contact with it, or you may get burned.
CMS Replacement instructions
Meaning
A triangle indicates a danger
against which you should take
precaution.
A diagonal line indicates a pro-
hibited course of action.
A black circle indicates an im-
perative course of action.
Example Meaning
This symbol warns against pos-
sible causes of burns.
This symbol warns against dis-
mantling the device.
This symbol indicates you must
unplug the device.
Symbol
1
1-3