PF-701
4
PF-701
4.1
Pick-up roller unit/Separation roller unit
Purpose
To return to the normal operation as soon as possible when a decrease in the
paper feedability is found due to the deterioration of the pick-up roller or sep-
aration roller.
Procedure for removal
Note
The removing/reinstalling methods of the pick-up roller unit and the sep-
aration roller unit are the same for all of the trays 3, 4 and 5. The expla-
nation here is made of the examples of the tray 3.
There are two types of pick-up roller unit and separation roller unit by the
materials of them. However, the procedure of them is the same.
If an optional PP-701 (Pre-Printed Paper Feeding Kit) is installed, replace
the related rollers in the same procedure as described below.
1
Turn OFF the sub power switch.
CMS Replacement instructions
Sub power
switch
4
4-1