VarioPrint 1105
Procedure for reinstallation
Note
The method for replacing the pick-up roller assembly/separation roller
assembly is the same for the tray 1 and the tray 2. The explanation here
is given of the tray 1.
After completion of the installation, rotate the pick-up roller in the direc-
tion of the paper feed (counterclockwise as seen from the front) to check
to see if the paper feed roller, the belt and the coupling section rotate
smoothly. The rotation of the pick-up roller is restricted only to the direc-
tion of the paper feed (counterclockwise as seen from the front) and be
absolutely sure not to turn it clockwise.
Be sure to take note that the direction of the pick-up roller assembly is
different for the main body and the PF-701.
1
Insert the new separation roller assembly askew and engage the cou-
pling pin with the joint.
Note
Be sure to engage the coupling pin with the joint.
CMS Replacement instructions
Joint
Coupling pin
Separation roller
assembly
2
2-9