Canceling The Recover Operation; Canceling A Dat Recovery Operation In Progress; When An Error Is Found In The Song Data; Checking Dat Tape Contents - Roland VS-1680 User Manual

Canceling the Recover Operation

You can cancel the recover operation by pressing [EXIT
(NO)] during the recover. Also, when there is an error in
song data backed up on a tape, the recover operation is
temporarily halted. In such instances, you can choose
whether to leave or delete the unfinished song data
recovered up to that point.
* This procedure does not correct the drive error, but tries to
restore the song and save as much of the data as possible.
Depending on the location where the error occurred, some
noises may be generated, or settings for the mixer, tempo map,
and/or sync track may be lost.
* Loud noises may damage your amplifier and speakers. Turn
down the headphones and master volume of the VS-1680 when
you check for errors in the song data.
Canceling a DAT Recovery
Operation in Progress
1. Press [EXIT (NO)] during the DAT recovery. Recovery is
stopped, and "Delete Err Song?" (Delete the song
containing the error?) appears in the display.
2. If you would like to delete the problem song data that
stopped the recovery operation from the hard drive ,
press [YES]. If you would like to leave it unchanged,
even though recovery is not complete, press [NO].
When an Error is Found in the
Song Data
1. If an error is found in song data that was recovered with
the DAT Recover operation, "Recover Err Retry ?"—"An
error was found, retry the recovery?"—appears in the
display.
2. If you want to recover the data, press [YES]. If you want
to cancel the recovery, press [NO].
3. If you press [NO] in Step 2, "Delete Err Song ?" appears
in the display.
4. If you would like to delete the song data from the hard
drive, press [YES]. If you would like to keep it as is even
though the error is included, press [NO].
Chapter 19 Using a DAT Recorder (DAT Backup)

Checking DAT Tape Contents

This operation lets you view the names of songs saved to a
DAT tape. Even if you have saved the data of two or more
songs in a single backup operation, you can check the name
of each song.
1. Connect the VS-1680 and the DAT recorder as shown
below.
fig.09-06c
Optical
fig.09-06d
Coaxial
Digtal Out
DAT recorder
Digital Out
DAT recorder
235