Roland VS-1680 User Manual page 117

8. Make the settings for the effects. Use [
adjust each of the values. Press [F3 (EFX A)] to make settings to EFFECT A (EFX1/2); press [F4 (EFX B)] to make settings to
EFFECT B (EFX3/4).
fig.02-33
9. Press [F2 (STEP ->)]. You can return to the previous screen by pressing [F1 (STEP<- )].
10. Decide whether or not to record the output of each effect to a track. First, press the Effect SELECT button for Effect 1 or Effect
2, then press the STATUS button for the track you want the effect recorded on. To select EFX 3 or EFX 4, hold [SHIFT] and
press the Effect SELECT button.
fig.02-34
11. Press [F2 (STEP ->)]. You can return to the previous screen by pressing [F1 (STEP<- )].
12. Select mixer channels to be output to the AUX bus. The AUX bus is useful for sending tracks to an external effects processor.
Use [ ], [ ], [
], [ ], [
Cursor
Track to be recorded
], and [ ] to move the cursor and the TIME/VALUE dial to adjust each of the values.
], and [ ] to move the cursor and the TIME/VALUE dial to
Chapter 8 EZ Routing
Effect Switch
Send Level
Send Pan
117